Tổng quan về West Controls Solutions

West Controls Solutions là công ty chuyên môn về kiểm soát nhiệt độ và quy trình  bao gồm 4 công ty nhỏ :  PMA, West Instruments ,CAL Controls & Partlow. Với sự kết hợp nguồn lực và kiến ​​thức chuyên môn của 4 công ty ưu tú này , West-cs  tự hào cung cấp các sản phẩm hiệu quả, tiết kiệm chi phí và chất lượng cao mà thị trường tự động hóa ngày nay đang đòi hỏi.

PMA  là nhà sản xuất chuyên về điều khiển vòng kín, vận hành kỹ thuật số cho ứng dụng công nghiệp. PMA sử dụng các thuật toán điều chỉnh nâng cao và logic có thể lập trình để tạo ra các giải pháp hệ thống cho các quy trình phức tạp. Là chuyên gia trong việc sử dụng PLC kết hợp với các hệ thống I / O phân tán và HMI tùy chỉnh, các giải pháp PMA đi đầu trong đổi mới công nghệ và kỹ thuật và PMA được công nhận là công ty dẫn đầu thị trường về điều khiển quy trình cho ngành công nghiệp ép đùn nhựa.

Danh mục sản phẩm PMA bao gồm :

  • Bộ điều khiển nhiệt độ vòng lặp đơn- Single loop temperature controller

Với các dòng sản phẩm nổi bật  KS40-1, Đầu đốt KS40-1, KS41-1, KS42-1, KS45, KS50-1, Ks52-1, KS90-1, KS92-1, KS94

  • Bộ điều khiển quá trình và nhiệt độ nhiều vòng- Multi loop controller

Với các dòng sản phẩm nổi bật:  KS800, KS816, KS98-1, KS Vario

  • Bộ điều khiển giới hạn – Limit controller

Với các dòng sản phẩm nổi bật:  STB55, TB45

  • Bộ hiển thị  kỹ thuật số- Digital Indicator

Với các dòng sản phẩm nổi bật:  D280-1

  • Bộ chuyển đổi tín hiệu - transmitter

Với các dòng sản phẩm nổi bật:  CI45, SG 45

 

 

West (trước đây là West Instruments) được thành lập vào năm 1946 và là một trong những công ty sản xuất bộ điều khiển đầu tiên đưa ra thị trường bộ điều khiển nhiệt độ dựa trên bộ vi xử lý. West luôn luôn đi đầu trong việc phát triển các thuật toán tự điều chỉnh.

Có trụ sở tại Brighton, Vương quốc Anh, West tiếp tục truyền thống nghiên cứu & phát triển và sản xuất và là trung tâm hàng đầu trên toàn thế giới về phát triển và sản xuất các bộ điều khiển nhiệt độ và quy trình cho toàn bộ tập đoàn.

West chuyên về các sản phẩm sau cho một loạt các ngành công nghiệp và khoa học cho các ứng dụng xử lý nhiệt, lò nướng và lò nung, nhựa và ép nhựa, thực phẩm và đồ uống:

  • Bộ điều khiển nhiệt độ vòng lặp đơn

Với các dòng sản phẩm nổi bật:  6100+, 4100+, 8100+

  • Bộ điều khiển giới hạn

Với các dòng sản phẩm nổi bật:  6700+, 4700+, 8700+

  • Bộ điều khiển động cơ van (VMD)

Với các dòng sản phẩm nổi bật:  6170+, 4170+, 8170+

  • Bộ điều khiển đa vòng

Với các dòng sản phẩm nổi bật:  MLC 9000+

  • Máy đo nhiệt độ và quy trình

Với các dòng sản phẩm nổi bật:  6400, 4400

  • Các chỉ báo kỹ thuật số quy trình

Với các dòng sản phẩm nổi bật:  8080, 6010+, 8010+

CAL Controls được thành lập vào năm 1963 tại Hertfordshire, Vương quốc Anh.

CAL Controls phát triển sản phẩm dựa trên các tiêu chuẩn công nghệ trên toàn thế giới như bộ điều khiển kỹ thuật số và ngõ ra 1/16 DIN (48x48mm) đầu tiên, tiếp theo là bộ điều khiển kỹ thuật số 1/32 DIN (24x48mm). Những đổi mới này đã củng cố vững chắc CAL Controls như một công ty hàng đầu trong phân khúc thị trường Khoa học Đời sống và Phòng thí nghiệm.

Dải sản phẩm CAL bao bộ điều khiển vòng lặp đơn, đa vòng và giới hạn với dòng sản phẩm:

CAL 3300, CAL 9300, CAL 9400, CAL 9500P & Phần mềm CALgrafix

Partlow ban đầu được thành lập vào năm 1920. Để phục vụ khách hàng tốt hơn, thương hiệu Partlow đã được tách ra và đưa vào các nhóm bán hàng độc đáo sau:

Partlow Mechanical – sáp nhập với Fortive Specialty Products có trụ sở tại Lancaster, SC, Hoa Kỳ

Partlow Electronic - cùng với các thương hiệu sản phẩm CAL, PMA và West tạo thành West Control Solutions.

Partlow Electronic Products chuyên về bộ điều khiển quá trình và nhiệt độ dạng DIN cung cấp khả năng điều khiển PID. Phạm vi cũng bao gồm một số bộ điều khiển giới hạn. Ngoài ra,  Partlow cũng cung cấp bộ ghi dữ liệu dạng biểu đồ đường, biểu đồ điểm, biểu đồ tròn và bộ ghi dữ liệu không cần giấy. Bộ ghi dữ liêu Partlow cung cấp đa dạng các biểu đồ linh hoạt từ cơ bản đến nâng cao bao gồm chức năng lập trình cho tối đa bốn vòng lặp và tối đa 16 cấu hình. Biểu đồ có kích thước từ đường kính 10 "đến 12".

Danh mục sản phẩm của Partlow bao gồm:

• Bộ điều khiển nhiệt độ Partlow

Dòng: 1160+, 1400+, 1800+, 1161+, 1401+, 1810+

Bộ ghi biểu đồ Partlow

Dòng DataVU 5, DataVU 7, MRC500, MRC7000, MRC8000, MRC9000

Product

DIN Size

Dimensions 

Display  Features Certs.
MAXVU16 ProductPageThumb2

MAXVU16

1/16 DIN 48mm x 48mm x 67mm 18mm upper and 10.2mm lower display digits
  • ‘Heat’ only or ‘heat & cool’ strategy
  • 2 alarms (absolute, deviation, band, loop)
  • Latching or non-latching alarm outputs
  • Zero shift or 2 point calibration
  • Ramp/dwell with delay time
  • 3 tactile keys
  • Front keys or software programming
  • Integral configuration port

 

  • CE
  • UL & cUL

 

MAXVU8 ProductPageThumb

MAXVU8

1/8 DIN

96mm x 48mm x 67mm

18mm upper and lower display digits
  • ‘Heat’ only or ‘heat & cool’ strategy
  • 2 alarms (absolute, deviation, band, loop)
  • Latching or non-latching alarm outputs
  • Zero shift or 2 point calibration
  • Ramp/dwell with delay time
  • 3 tactile keys
  • Front keys or software programming
  • Integral configuration port
  •  

 

  •  
    • CE
    • UL & cUL

     

6100+ Single Loop Controller t

West 6100+

1/16th DIN

48 x 48 x 107mm

4 Button Operation
2 x 4 Digit LED
Optional Red/Green
5 LED Indicators
  • Dual Setpoints 
  • Heat/Cool Operation
  • Pre, Auto or Manual Tuning
  • Plug-in Output Modules 
  • User-Selectable Operator Modes
  • User-selectable Plug-and-Play Output Cards
  • Process and Loop Alarms
  • Adjustable Hysteresis

 

  • IP66
  • CE
  • UL
  • ULC
  • CSA

 

8100+ Single Loop Controller t

West 8100+

1/8th DIN

96 x 48 x 100mm

4 Button Operation
2 x 4 Digit LED
Optional Red/Green
5 LED Indicators
  • Dual Setpoints 
  • Heat/Cool Operation
  • Pre, Auto or Manual Tuning
  • Plug-in Output Modules 
  • User-Selectable Operator Modes
  • User-selectable Plug-and-Play Output Cards
  • Process and Loop Alarms
  • Adjustable Hysteresis
  • IP66
  • CE
  • UL
  • ULC
  • CSA
4100+ Single Loop Controller t

West 4100+

1/4th DIN

96 x 96 x 100mm

4 Button Operation
2 x 4 Digit LED
Optional Red/Green
5 LED Indicators
  • Dual Setpoints 
  • Heat/Cool Operation
  • Pre, Auto or Manual Tuning
  • Plug-in Output Modules 
  • User-Selectable Operator Modes
  • User-selectable Plug-and-Play Output Cards
  • Process and Loop Alarms
  • Adjustable Hysteresis
  • IP66
  • CE
  • UL
  • UL
  • CSA
Pro EC44 RHF thumb

Pro-EC44

1/4 DIN 96m x 96mm x 118mm  Day & Night display 
shows plain text
and bargraphs
  • Up to 64 programs with 255 segments
  • 5 control (event) tracks
  • Plain text program names
  • BluePort® and BlueControl software
  • Two universal inputs
  • 5 PID set manually selectable
  • Self-Tuning at start-up and setpoint

 

  • CE
  • cULus

 

KS40 1 Single Loop Controller 100

KS 40-1

1/8 DIN

96 x 48 mm x 118 mm

2 x 4-digit LED Display
  • BluePort® Front interface and BlueControl© software
  • Maintenance manager and error list
  • Automatic/manual key
  • Monitoring of heating current and input circuit
  • Timer and programmer
  • Extended limit signalling function with latch
  • CE
  • cULus
  • UL
KS40 1 Single Loop Controller 100

KS 40-1

1/8 DIN

96 x 48 mm x 118 mm

2 x 4-digit LED Display
  • BluePort® Front interface and BlueControl© software
  • Maintenance manager and error list
  • Automatic/manual key
  • Monitoring of heating current and input circuit
  • Timer and programmer
  • Extended limit signalling function with latch
  • CE
  • cULus
  • UL
KS50 1 Single Loop Controller t

KS 50-1

1/8 DIN

48 x 48 x 107mm

2 x 3-digit LED Display
  • Freely configurable analogue output, e.g. as process value output
    Customer-specific linearisation for all sensors
    Extended temperature range up to 60°C
    - allows mounting close to the process
    Easy 2-point or offset measurement corrections
    Emergency operation after sensor break by means of
    the “output hold“ function

 

  • CE
  • cULus
  • DIN EN 14597

 

CAL 9300

CAL 9300

1/16th DIN

48 x 48 x 107mm

1 x 4 Digital LED
  • PID Control
  • Auto-Tune
  • Quick Start Wizard
  • Single Ramp/Soak (Dwell Programme)
  • On/Off Control
  • Derivative Approach Control (dAC)
  • Remote Configuration via CALgrafix
  • Datalogging Software

 

  • IP66
  • CE
  • UL
  • CSA
  • FM Approval

 

9400 Single Loop Controller t

CAL 9400

1/16th DIN

48 x 48 x 107mm

2 x 4 Digital LED
  • PID Control
  • Auto-Tune
  • Quick Start Wizard
  • Single Ramp/Soak (Dwell Programme)
  • On/Off Control
  • Derivative Approach Control (dAC)
  • Remote Configuration via CALgrafix
  • Datalogging Software

 

  • IP66
  • CE
  • UL
  • CSA
  • FM Approval

 

9500 Single Loop Controller t

CAL 9500P

1/16th DIN

48 x 48 x 107mm

2 x 4 Digital LED
  • Programmer Function
  • 31 Programs with up 126 Segments
  • PID Control
  • Auto-Tune
  • Quick Start Wizard
  • Remote Configuration via CALgrafix
  • Datalogging Software

 

  • IP66
  • CE
  • UL
  • CSA
  • FM Approval

 

KS 94 Single Loop Controller 100

KS 94

 1/4 DIN

 96 x 96 x 160mm

Multi-function LC display with red backlighting
  • Ratio control
  • Mean value
  • Feed-forward control
  • Override control
  • Measurement value output and DAC®
  • CE
KS 41 1 Single Loop Controller

KS 41-1

1/8 DIN

48 x 96 mm x 118 mm

2 x 3-digit LED Display
  • BluePort® Front interface and BlueControl© software
  • Maintenance manager and error list
  • Automatic/manual key
  • Monitoring of heating current and input circuit
  • Timer and programmer
  • Extended limit signalling function with latch
  • CE
  • cULus
  • UL

 

KS 42 1 Single Loop Controller 100

KS 42-1

1/4 DIN

96 x 96 mm x 118 mm

2 x 3-digit LED Display
  • BluePort® Front interface and BlueControl© software
    Maintenance manager and error list
    Automatic/manual key
    Monitoring of heating current and input circuit
    Timer and programmer
    Extended limit signalling function with latch

  • CE
  • cULus
  • UL
KS90 1 Single Loop Controller t

KS 90-1

1/8 DIN

96 x 48 mm x 118 mm

2 x 4-digit LED Display
  • BluePort® front interface and BlueControl© software
  • Maintenance manager and error list
  • Two universal inputs
  • Day & night display shows plain text and bargraphs
  • Type tested to EN 14597 (replaces DIN 3440) and cULus
  • Valve controller with position feedback and DAC monitoring
  • 3-point controller for water, fan and oil cooling
  • CE
  • cULus
  • DIN EN 14597

 

KS 92 1 Single Loop Controller t

KS 92-1

1/4 DIN

96 x 96 mm x 118 mm

2 x 3digit LED Display
  • BluePort® front interface and BlueControl© software
  • Maintenance manager and error list
  • Two universal inputs
  • Day & night display shows plain text and bargraphs
  • Type tested to EN 14597 (replaces DIN 3440) and cULus
  • Valve controller with position feedback and DAC monitoring
  • 3-point controller for water, fan and oil cooling
 
  • CE
  • cULus
  • DIN EN 14597
N2300 Single Loop Controller t

N2300

1/32 DIN 24 x 48 x 110 mm

1 x 4-digit LED Display 
Red or green

  • Simple operation for easy setup
  • 4 digit red/green digital display
  • PID control with manual override tune capability for 
  • specialised applications
  • Solid state relay output for primary control
  • CE
  • cULus
  • UL
N6400 Single Loop Controller t

N6400

1/6 DIN 48 x 48 x 110mm  1 x 4-digit LED Display 
Red or green
  • Fast and accurate control via raPID fuzzy logic
  • 4 programs with 16 free-form segments
  • Program ramps in rate or time mode
  • ‘Auto hold’ facility, remote run hold, event output, 
  • power failure recovery and guaranteed soak
  • CE
  • cULus
  • UL

 

4170+ Single Loop Controller

4170+

1/4 DIN 96 x 96 x 100mm  1 x 4-digit LED Display 
Red or green
  • Universal input for thermocouple, PT100, mV, V and mA sensors 
  • Valve position indication
  • Auto or manual tuning
  • Process & loop alarms
  • Remote/dual setpoint
  • CE
  • UL 
  • cUL
  • CSA
6170+ Single Loop Controller t

6170+

1/16 DIN 48 x 48 x 110mm 1 x 4-digit LED Display 
Red or green
  • Universal input for thermocouple, PT100, mV, V and mA sensors 
  • Valve position indication
  • Auto or manual tuning
  • Process & loop alarms
  • Remote/dual setpoint
  • CE
  • UL 
  • cUL
  • CSA
8170+ Single Loop Controller t

8170+

1/8 DIN 96 x 48 x 100mm 1 x 4-digit LED Display 
Red or green
  • Universal input for thermocouple, PT100, mV, V and mA sensors 
  • Valve position indication
  • Auto or manual tuning
  • Process & loop alarms
  • Remote/dual setpoint
  • CE
  • UL 
  • cUL
  • CSA
Pro 16 new product thumb 100

Pro-16

1/16 DIN

48m x 48mm x 118mm

2 x 4 Digital LED
  • Up to 16 profiles with x 16 segments with 4 event tracks
  • BluePort® Front interface and BlueControl software
  • Maintenance manager and error list
  • One universal input and one optional input
  • Up to 4 digital inputs
  • 2 PID set manually selectable
  • Self-Tuning at start-up and setpoint

 

  • CE
  • cULus

 

Pro 8 new product thumb

Pro-8

1/8 DIN 96mm x 48mm x 118mm  2 x 4 Digit LED
Optional Red
  • Up to 10 segments
  • BluePort® Front interface and BlueControl software
  • Maintenance manager and error list
  • One universal input and one optional input
  • 2 PID set manually selectable
  • Self-Tuning at start-up and setpoint
  • RS 422/485 Modbus RTU interface
  • Built-in transmitter power supply

 

  • CE
  • cULus
  • DIN EN 14597
  • GOST-R
Pro 4 new product thumb

Pro-4

1/4 DIN

96mm x 96mm x 118mm

Day & Night display
shows plain text
and bargraphs
  • Up to 16 programs with 16 segments each
  • 4 control (event) tracks
  • Plain text program names
  • BluePort® Front interface and BlueControl software
  • Maintenance manager and error list
  • Two universal inputs
  • 2 PID set manually selectable
  • Self-Tuning at start-up and setpoint
  • CE
  • cULus

 

PLastX6 Thumb

PlastX6

1/16 DIN

48mm x 48mm x 110mm

2 x 4 Digit LED
Optional Red/Green
  • Economic solution to precision temperature control of extruders
  • Fast Configuration with one page set-up guide
  • Suitable for both single screw, twin screw, plastic or rubber
  • Each controller selectable as heat only, heat/cool, or indicator
  • On/off button for disabling zone
  • LEDs for Low Alarm, Band Alarm, and Autotuning

 

  • CE
  • UL
  • ULC
  • CSA

 

PLastX8 Thumb

PlastX8

1/8 DIN 96mm x 48mm x 100mm  2 x 4 Digit LED
Optional Red/Green
  • Economic solution to precision temperature control of extruders
  • Suitable for both single screw, twin screw, plastic or rubber
  • Fast Configuration with one page set-up guide
  • Each controller selectable as heat only, heat/cool, or indicator
  • On/Off button for disabling zone
  • LEDs for Low Alarm, Band Alarm, and Autotuning

 

  • CE
  • UL
  • ULC
  • CSA