Cetal Vietnam,Thiết bị giá nhiệt 8474LS Cetal

 

CETAL IS COMMITTED AND INVESTS IN THE THEME OF “CORPORATE SOCIAL RESPONSIBILITY”

CETAL has defined a plan for 2025 to support the 2030 objectives defined by the United Nations concerning sustainable development.

2 major axes have been selected:

  • Contribute to the Sustainable Development Goals

  • Strengthen our employer brand and develop our employees

CETAL, ISO 14001 since 1994, carries out several concrete actions to limit its impact on the environment: recycling of materials, reduction in energy consumption, digitization of our processes.
CETAL wants to be a major player in decarbonization and bring its expertise to its customers in the decarbonization of their process.

CETAL has integrated its development in recent years by investing heavily in the development of its employees and the improvement of its organization.
An ambitious training program focused on technical expertise is in place for 2022.

ELECTRICAL HEATERS ; DIMENSIONS : L=1800, LU=200 MM  

Lò sưởi nhúng mặt bích bằng điện được thiết kế để làm nóng hoặc duy trì nhiệt độ của chất lỏng, khí hoặc hỗn hợp trong điều kiện tĩnh hoặc tuần hoàn.

The design is based on customer process conditions: fluid to heat (type and properties), in/out temperature, pressure, heat exchange conditions (stagnant or flowing), and environment conditions (ATEX or not, onshore or offshore, etc.).

Flange immersion heaters enable to heat any kinds of fluids such as waterthermal fluid, oil, heavy fuel, corrosive fluid, gas mixture, natural gas and many others fluids.

Flange immersion heaters can be straight or L-shaped.

The watt density, tube diameter and the tube sheath are chosen to optimize the reliability and robustness (corrosion, temperature) of CETAL equipments.

Technologies

  • Tubular heating element (most fo the cases)

  • Heating rods into sleeve

Tube diameter & material

  • Tube diameter: 6.5 / 8.5 / 10 / 13.5 / 16 mm

  • Tube material:

    • Stainless steel: AISI 321 (1.4541) / AISI 316L (1.4404) / AISI 309 (1.4828)

    • Others: Incoloy 800 (1.4876) / Incoloy 825 (2.4858) / Inconel 600 (2.4816)

    • Titanium

  • Specific coating: TeflonTM (PTFE) / Halar

  • Tube type: sealed tube, seamless tube (on request)

Manufacturing

  • 100% of the components come high quality supplier from Europe

  • 100% manufacture within CETAL factory

  1. Connection terminals

  2. Tube

  3. Insulation : magnesia oxyde (Mg O), to secure optimized heat transfer and electrical insulation.

  4. Resistance wire: Made of Nickel Chrome 80/20, it is the active part of the heating element (Joule effect)

  5. Cold length

  6. Sealing material: Keeps out external moisture. Different types (silicon, resins, cement) are used depending on the industrialapplication, the external medium and temperature.

  7. Output insulation: Made of steatite ou corundum, it provides dielectric insulation (creepage distance, distance in the air).

 

1

ELECTRICAL HEATERS ; DIMENSIONS : L=1800, LU=200 MM ; FREQUENCY : 50 ; MANUFACTURER : ELMESS            THERMOSYSTEMTECHNIK                             ; MANUFACTURER_PART_NUMBER : HG-220 ;  PHASE

: 3 PH ; RATING_LOAD : 319 A ; VOLTAGE : 400 VOLT

; POWER, OUTPUT : 220 KW (STAGE 1 : 60KW ;  STAGE 2 : 60KW ; STAGE 3 : 60KW ; STAGE 4 :  40KW)

; FLANGE RATING : 16 IN, 150 LBS, RF, ANSI B16.5 ; DEGREE PROTECTION : IP 55 ; ANTI- CONDENSATIONHEATER : 130W/230V ; SPECIFIC SURFACE LOAD : 3,0 W/CM2 ; HEATING SHEATH : SS-AISI 321 / METALLIC BLANC ; FLANGE MATERIAL : CS-C22.8 / VARNISHED ; CASING : CS- ST1203 / VARNISHED ; TEMPERATURE : -10 TO +350 DEG.C ; PRESSURE : 3 BARG ; DESIGN DATA : CODE PED 97/23 EC AD2000 ;

ELMESS          THERMOSYSTEMTECHNIK

2

ELECTRICAL HEATERS       ; CLASSIFICATION_HAZARD_AREAS : EX D IIC, IP66 ; FREQUENCY : 50 HZ ; MANUFACTURER : CETAL ; MANUFACTURER_PART_NUMBER : 26-160-01 ; PHASE : 3 ; RATING_LOAD : 197 KW ; VOLTAGE : 400 VOLT ; ADDITIONAL INFO : REFER TO ATTACHED DOCUMENTS FOR DETAIL INFORMATION. ; ALL ACCESSORIES ARE REQUIRED. ;

CETAL

 

Liên hệ & Báo giá chi tiết:

Sale ANS Vietnam:

support@ansgroup.asia

  Trực tiếp FaceBook

 Trực tiếp Zalo: 0911472255 

 

=====================================================

Click xem thêm ứng dụng sản phẩm khác

Đại lý phân phối chính hãng tại Vietnam 

Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7 

Xem thêm sản phẩm hãng CETAL tại đây

Xem thêm thông tin về thương hiệu khác tại đây

Xem thêm sản phẩm khác tại đây