Đại lý Bifold/ Rotork Vietnam,MÁY BƠM SMWS-00-00104-0560-6-4-CC-H-08-06-0 Bifold/ Rotork

The 1.7Kw type SMW hydraulic pump is specifically designed for water-based fluids. Separation of the lubricating oil and the pumped fluid is achieved by the installation of a cavity between the cylinder block and the case. Bypass from the pistons is collected in this cavity and returned to the inlet side of the pump. The SMW pump incorporates three, four or six axial pistons actuated by a single rotating swash plate.

Installation

Rotation is bi-directional and the pump may be mounted horizontally or vertically. Vertical motor pump units are supplied with a bellhousing and coupling. Horizontal units have the option of direct coupling between the pump and motors from 71 to 90 frame size.

A suction filter of 150 microns or better should be used. Finer filtration is desirable for the pump life, but is important that the inlet flowrate to the pump is not restricted and no more than -2 in.Hg is measured in the suction pipework under pumping conditions. Where possible a positive pressure should be maintained in the suction pipework under flowing conditions. When the pump is stationary the suction line should be kept under positive pressure to allow priming.

Important - pumps are delivered from Marshalsea with the case lubricating oil drained. Before the pumps are used, the case should be filled with Castrol Alphasyn PG150 to the level specified on the pump technical data sheet

Material

All external components manufactured from 316 stainless steel – pump shaft is medium carbon steel EN8.

Weight

15 Kg

=====================================================

ANS là đại lý phân phối chính hãng Bifold/ Rotork tại Vietnam 

Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7 

Xem thêm sản phẩm hãng Bifold/ Rotork tại đây

Xem thêm thông tin về thương hiệu khác tại đây

Xem thêm sản phẩm khác tại đây