LEVELING BASE ASSEMBLY 31931 GURLEY
Giá bán: Liên hệ
Hãng sản xuất: GURLEY
Danh mục: Thiết bị đo lường & Kiểm tra
Nhà cung cấp: ANS Vietnam
Xuất sứ: 100% USA Origin
Ứng dụng sản phẩm: Automotive
Gọi lại cho tôi
0911472255GURLEY Vietnam,LEVELING BASE ASSEMBLY 31931 GURLEY
Description
High Pressure Densometers are the accepted standard for measuring the porosity, air-permeability or air-resistance of materials having low permeability.
Typical materials include coated papers, plastics and membranes. High Pressure units are recommended whenever a standard unit would yield excessive measurement times. Manual and automatic units available. Conform to TAPPI T-536-88 and ASTM D-726-58, Method B.
Specifications
The densometer test measures the time required for a specific volume of air (2.5cc to 30cc), at a constant pressure of 12.33 inches W.C., to flow through a standard area of the material being tested. The air pressure is supplied by a weighted inner cylinder floating freely within an outer cylinder which is partially filled with oil to act as a seal. The sample material is held between clamping plates having a circular orifice area of 1.0 square inch (standard).
High pressure units are recommended whenever a standard unit would yield excessive measurement times. Porosity readings with the high pressure densometer are much faster than those taken with a regular densometer. This difference can be as great as twenty-five times faster since higher air pressure is used and air volumes are one-tenth those measured with a standard densometer. Readings also can be affected by using different adapter plates with smaller orifices on all models.
Conversion of Models Containing Mercury to Oil
The new oil-filled high pressure densometers replace older mercury-filled models yet feature identical performance, continued reliability and accuracy. The only difference is the physical height of the unit (27″ with inner cylinder down).
Obsolete Models 4120 & 4200 contain mercury which may pose personal safety hazards. These instruments can be converted to oil by replacing the entire upper cylinder assembly. The conversion must be performed at our Troy, NY factory and includes packaging for and disposal of the mercury. Please refer to No. 4050-C Product Bulletin for details.
100% USA Origin |
GURLEY
|
4110N
|
100% USA Origin |
GURLEY
|
4320EN
|
100% USA Origin |
GURLEY
|
31931
|
=====================================================
Đại lý phân phối chính hãng GURLEY tại Vietnam
Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7
Xem thêm sản phẩm hãng GURLEY tại đây
