Raytek Vietnam,Cảm biến nhiệt độ hồng ngoại Raytek CI- Raytek RAYCI2A 

Cảm biến nhiệt độ hồng ngoại Raytek CI- Raytek RAYCI2A Infrared Temperature Sensor    

 

Cảm biến nhiệt độ hồng ngoại Raytek RAYCI2A, Type K Output, 0 to 115°C (32 to 240°F) - Raytek RAYCI2A Infrared Temperature Sensor

  • Cảm biến nhiệt độ hồng ngoại Raytek CI được thiếu kế để đo nhiệt độ hồng ngoại trong một cảm biến nhỏ gọn, chi phí thấp và dễ dàng thay thế các đầu dò tiếp xúc truyền thống bằng đầu ra cặp nhiệt J hoặc K, hoặc đầu ra 0-5V, khi được tích hợp vào hệ thống 4 dây tiêu chuẩn

  • Dải đo nhiệt độ mục tiêu trong khoảng từ 0 đến 115 ° C (32 đến 240 ° F), các thiết bị điện tử trên bo mạch của cảm biến Raytek CI được bảo vệ bằng vỏ thép không gỉ IP 65 (NEMA-4) chắc chắn, cho phép cảm biến hoạt động ở nhiệt độ môi trường xung quanh 70 ° C (160 ° F) mà không cần làm mát. Cảm biến CI có thể chịu được nhiệt độ môi trường xung quanh trong môi trường làm mát đến 260 ° C (500 ° F)

  • Có thể được sử dụng trong các ứng dụng: đúc thổi, sơn phủ, gia công nhiệt, làm khô, dập nổi, đùn, tạo hình, gia nhiệt, cán, đúc, tách lớp, lát đường, in và tạo hình bằng nhiệt.

Temperature Range

0 to 115°C (32 to 240°F)

Temperature Resolution

<0.5°C or 1°F

Accuracy

±2% or ±3ºC (6°F), whichever is greater

System Repeatability

±1% of measured value or ±1°C (2°F), whichever is greater

Response Time (95%)

350 mSec

Emissivity

Fixed at 0.95

Spectral Response

7 to 18 µm

Optical Resolution

4:1 (Distance : Spot Size)

 

Datasheet: https://www.raytek-direct.com/pdfs/cache/www.raytek-direct.com/rayci2a/datasheet/rayci2a-datasheet.pdf

Manual: https://www.raytek-direct.com/pdfs/cache/www.raytek-direct.com/rayci2a/manual/rayci2a-manual.pdf

Cảm biến nhiệt độ hồng ngoại Raytek CM- Raytek RAYCMLTV3M Infrared Temperature Sensor

Cảm biến nhiệt độ hồng ngoại Raytek CM là cảm biến hồng ngoại tích hợp, nhỏ gọn, mạnh mẽ được thiết kế để theo dõi nhiệt độ liên tục, dễ dàng thay thế các đầu dò tiếp xúc truyền thống bằng đầu ra cặp nhiệt điện J hoặc K hoặc đầu ra 0-5V có thể mở rộng, nếu ứng dụng của cần hoạt động trong môi trường yên tĩnh

Mặc dù có kích thước nhỏ nhưng cảm biến CM được trang bị các tính năng tiên tiến. Giao diện kỹ thuật số RS232 hai chiều cho phép người dùng xác định cấu hình các biến cảm biến với Phần mềm DataTemp Multidrop đi kèm với mỗi cảm biến. Chúng bao gồm đầu ra cảnh báo 24VDC được kích hoạt bởi nhiệt độ mục tiêu hoặc nhiệt độ môi trường xung quanh, đèn LED báo tình trạng cảm biến tích hợp cung cấp một chỉ báo trực tuyến về trạng thái hoạt động của cảm biến và hỗ trợ khắc phục sự cố khi thiết lập cảm biến ban đầu

Output

Scaleable 0-5VDC

Temperature Range

-20 to 500ºC (-4 to 932ºF)

Temperature Resolution

0.1°C

Accuracy

±1.5% of reading ±2ºC or ±4ºC, whichever is greater

Repeatability

±0.5% of reading ±1ºC or ±2ºC, whichever is greater

Response Time (95%)

150 mSec

Spectral Response

8 to 14 µm

Optical Resolution

13: 1 @ 90% energy

Emissivity

0.10 to 1.10 (adjustable)

Transmissivity

0.10 to 1.00 (adjustable)

Thread

18M x 1 metric

Power Supply

24 VDC ±20% @ 20mA

Datasheet: https://www.raytek-direct.com/pdfs/cache/www.raytek-direct.com/raycmltv3m/datasheet/raycmltv3m-datasheet.pdf

Manual: https://www.raytek-direct.com/pdfs/cache/www.raytek-direct.com/raycmltv3m/manual/raycmltv3m-manual.pdf

 

THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. 

RAYTXXTJ3

 

ThermoJacket housing for TX sensors 

THERMOJACKET ACCESSORIES

XXXTXXMF

  

Mounting Flange for ThermoJacket 

XXXTXXMB

 

Adjustable mounting base for ThermoJacket  

XXXTXXGTQ

 

Blast Gate Assembly with Quartz Window (HT model)  

XXXTXXGTA

 

Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models)  

XXXTXXAPA

 

Adjustable Pipe Adapter assembly 

XXXTXXMST

 

Mounting flange for use with sighting tubes

XXXTSTC12

 

30 cm (12") sighting tube, ceramic (up to 1500°C) 

XXXTST12

 

30 cm (12") sighting tube, stainless steel (up to 800°C)

BEESIGHTT

 

30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base  

FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES

XXXTXXWR

  

Water flow regulator (water cooling)  

XXXTXXAR

 

Air purging flow regulator assembly with air filter  

XXXTXXCAFR

 

Cooling air flow regulator (high capacity)  

 THERMOJACKET & ACCESSORIES

THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. 

RAYTXXTJ3

 

ThermoJacket housing for TX sensors 

RAYTXXTJ4

 

ThermoJacket housing for Marathon MM Sensors 

RAYTXXTJ5

 

ThermoJacket housing for XR sensors 

THERMOJACKET ACCESSORIES

XXXTXXMF

  

Mounting Flange for ThermoJacket 

XXXTXXMB

 

Adjustable mounting base for ThermoJacket  

XXXTXXGTQ

 

Blast Gate Assembly with Quartz Window (HT model)  

XXXTXXGTA

 

Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models)  

XXXTXXAPA

 

Adjustable Pipe Adapter assembly 

XXXTXXMST

 

Mounting flange for use with sighting tubes  

XXXTSTC12

 

30 cm (12") sighting tube, ceramic (up to 1500°C)  

XXXTST12

 

30 cm (12") sighting tube, stainless steel (up to 800°C)  

BEESIGHTT

 

30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base 

XXX2CFT

 

Focus Adjustment Tool, for use when MR1S sensors are installed in a Thermojacket. 

BF2TJEXTENDER

 

ThermoJacket Extension flange for CCD camera accessories mounted on MR Sensor in ThermoJacket 

BD3TJBACK

 

ThermoJacket Rear cover with Peep-sight used for sighting Marathon models without removal  

XXXGTQHTW

 

Replacement Quartz Window for Blast Gate Assembly

JNTHDKIT

 

Conversion Kit to install TX into existing Thermo-Jacket

JNTORINGKIT

 

5 complete O-ring sets for service of ThermoJackets

FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES

XXXTXXWR

  

Water flow regulator (water cooling)  

XXXTXXAR

 

Air purging flow regulator assembly with air filter  

XXXTXXCAFR

 

Cooling air flow regulator (high capacity)  

Raynger® 3i Plus

RAYR3IPLUS1ML

 

1 micron w/ Dual laser (EN60825 Class 2, FDA Class II)
DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB

RAYR3IPLUS1MSCL

 

1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope
DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB

RAYR3IPLUS2ML

 

1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II)
DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB

RAYR3IPLUS2MSCL

 

1.6 micron w/ Dual Laser  (EN60825 Class 2, FDA Class II) + Scope,
DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB

RAYR3IPLUSNBT1ML

 

1 micron w/ Dual laser (EN60825 Class 2, FDA Class II)
DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB

RAYR3IPLUSNBT1MSCL

 

1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope
DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB

RAYR3IPLUSNBT2ML

 

1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II)
DS 250:1, 400°C to 2000°C (752 to 3632°F), USB

RAYR3IPLUSNBT2MSCL

 

1.6 micron w/ Dual Laser  (EN60825 Class 2, FDA Class II) + Scope,
DS 250:1, 400°C to 2000°C (752 to 3632°F), , USB

3IPLUS Accessories

XXXR3IPLUSCC

 

Carrying case

XXXR3IPLUSSTRAP

 

Neck strap 

XXXR3IPLUSACCU

 

Spare Lithium-ion rechargeable battery, 2.5 Ah 

XXXR3IPLUSPS

 

Mini USB port adaptor with multi-country power plug 

 

 

(100 – 240 VAC, 50/60 Hz), including SAA, EU, UK, US and CCC

XXXR3IPLUSPSCON

 

Mini USB-to-DC jack converter for charging battery separately 

XXXR3IPLUSUSBCB

 

Computer cable with USB-to-Mini USB, 1.5 m (4.9 ft)

Raytek® MP150 Linescanner

RAYTMP150-LT

 

20 to 350°C (68 to 662°F), 3 to 5 µm 

RAYTMP150-MT

 

100 to 800°C (212 to 1472°F),  3.9 microns 

RAYTMP150-G5

 

100 to 950°C (212 to 1742°F),  5 microns

RAYTMP150-P30

 

30 to 250°C   (86 to 482°F),       3.43 microns 

RAYTMP150-P31

 

100 to 350°C (212 to 662°F),    3.43 microns

RAYTMP150-1M

 

600 to 1200°C (1112 to 2192°F), 1 micron

RAYTMP150-2M

 

400 to 950°C (752 to 1742°F),    1.6 micron 

RAYTMP150-HR

 

100 to 650°C (212 to 1202°F),    3.5 to 4 micron
HR scanners are purpose built for cement scanning applications and include an internal heater and special focus distance as standard equipment. They are not equipped with a High Pressure Air Purge (HPAP). As such the only available part number is RAYTMP150HRR1.

Comunication Option R

 

RJ-45: Scanner data link is configured to plug into any standard RJ45 Ethernet network socket

Data Point Option (0)

 

Standard configuration: 512 data points per scan line (up to 80Hz), 256 data points (80 to 150Hz)

Data Point Option (1)

 

Enhanced configuration: 1024 data points per scan line (up to 40Hz), 512 data points per scan line (40 to 80Hz), 256 data points (80 to 150Hz)

XXXTMP150CERT

 

Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)

MP150 INFRARED LINESCANNER ACCESSORIES

XXXHSFIC1

 

High Speed Fiber-Optic/RJ45 Converter (1 Channel)

XXXHSFIC4

 

High Speed Fiber-Optic/RJ45 Converter (4 Channel) 

XXXHSFICBOX

 

BOX FOR FIBER OPTIC/RJ45 CONVERTER + PS

SVCOSSAPKG

 

On-site Start-up and Commissioning Service (North America Only)

XXXTMP50ACMP

 

Mounting Plate for setting on a Tripod   

XXXTMP50ACRMB

 

Adjustable Rugged Mounting Base, includes scanner mounting plate  

XXXTXXWR

 

Water Flow Regulator 

XXXTMP50THERM

 

Thermostatic Control System  

XXXTXXCAFR

 

Air Flow Regulator, high capacity, for purging window 

XXXTMP50ACFG

 

Laser Enhancing Filter Eyeglasses for laser sighting 

XXXTMP50SPSCB

 

Spare MP50 power cable, 180°C max.     7.5 meters (25 ft.) long  

XXXTMP50SPSCB10

 

Spare MP50 power cable, 180°C max.     10 meters (33 ft.) long 

XXXTMP150SPETHCB

 

Spare MP150 Ethernet cable, 180°C max. 7.5 meters (25 ft.) long  

XXXTMP150SPETHCB10

 

Spare MP150 Ethernet cable, 180°C max. 10 meters (33 ft.) long  

XXXTMP50S485CB

 

Spare MP50 RS485 Cable with RS232 converter,180°C max.   7.5 meters (25 ft.) long   

XXXTMP50S485CB10

 

Spare MP50 RS485 Cable with RS232 converter,180°C max.   10 meters (33 ft.) long. 

XXXTMP50S4PCN

 

Spare MP50 4-pin connector  

XXXTMP50S6PCN

 

Spare MP50 6-pin connector 

XXXTMP50AC485CV

 

Spare RS485 converter for MP50 (no cable) 

XXXSYS485CV

 

RS232/RS485 Converter (required for Output Modules). 

XXXSYSPS

 

24VDC power supply (100/240),1.3 amps

XXXUSB485

 

USB to RS232/422/485 converter 

XXXTMP150ACSWK1M

 

SPARE WINDOW FOR MP1501M

XXXTMP150ACSWK2M

 

SPARE WINDOW FOR MP1502M

XXXTMP150ACSWKG5

 

SPARE WINDOW FOR MP150G5

XXXTMP150ACSWKHR

 

SPARE WINDOW FOR MP150HR

XXXTMP150ACSWKLT

 

SPARE WINDOW FOR MP150LT

XXXTMP150ACSWKMT

 

SPARE WINDOW FOR MP150MT

XXXTMP150ACSWKP3

 

SPARE WINDOW FOR MP150P3

XXXTMP150FSNPT

 

NPT Fitting Set

XXXTMP150FSISO

 

ISO Fitting Set

XXXTMP150ACCC

 

Carrying case

High Temp Enclosure

XXXSYSENC

 

Enclosure & Base
Stainless steel enclosure with mounting base and integrated fail-safe shutter, includes grommet plates for wiring and cooling water (if req'd) and mounting aperture for high performance vortex cooler 

XXXSYSENCICP

 

Internal Cold-Plates
Internal cold plates designed to cool scanner directly, Eliminates the need to disconnect plumbing fittings to remove scanner, supplied pre-connected with high temperature hoses - supplied as set of two. 

SYSENCVT

 

High Performance Vortex Cooler
Separates compressed air (or nitrogen) into hot and cold streams to actively cool enclosure interior 

XXXSYSENCWCS

 

Water Cooled Shield
Stainless steel high performance water shield. One inch water inlet and outlet permit high flow rates and extremely high heat removal capability. 

XXXSYSENCIS

 

Insulating Shield
A custom stainless steel envelope filled with high performacne refractory material. Placed closest to the process, it prevents heat form entering the enclosure and lessens the heat removal requirements of other elements. 

 TF150 Process Imaging System for Thermoforming

RAYTTF150-LT

 

TF150 System with MP150LT 20 to 350°C   (68 to 572°F),  3 to 5 microns  

RAYTTF150-MT

 

TF150 System with MP150MT, 100 to 800°C (212 to 1472°F),  3.9 microns 

RAYTTF150-P30

 

TF150 System with MP150P30,  30 to 250°C   (86 to 482°F),  3.43 microns  

RAYTTF150-31

 

TF150 System with MP150P31, 100 to 350°C (212 to 662°F),  3.43 microns  

OPTION FOR TF150

XXXTMP150CERT

 

Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)

XXXTMP50ACRMB

 

Adjustable Rugged Mounting Base (includes scanner mounting plate)  

XXXHSFIC1

 

High Speed Fiber-Optic/RJ45 Converter (1 Channel)

XXXHSFIC2

 

High Speed Fiber-Optic/RJ45 Converter (4 Channel) 

XXXHSFICBOX

 

Housing, Fiber optic/RJ-45 converter and power supply

SVCOSSAPKG

 

On-site Start-up and Commissioning Service (North America Only)

 

GS150/GS150LE Process Imaging System for Glass Processing

RAYTGS150G5R1

 

specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line.

RAYTGS150G5R0

 

specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line.

UPGRADES

 

 

RAYTGS150LEUPGRADE

 

The GS150LE system was developed specifically to monitor glass which has been coated on one side with a low-emissivity coating.  Includes specialized MI3 sensor and GS150LE software, air-purge jacket, PC connection Kit

OPTIONS

 

 

XXXTMP150CERT

 

Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)

XXXTMP50ACRMB

 

Adjustable Rugged Mounting Base (includes scanner mounting plate) 

 

 

 

 

 

 

XXXHSFIC1

 

High Speed Fiber-Optic/RJ45 Converter (1 Channel)

XXXHSFIC2

 

High Speed Fiber-Optic/RJ45 Converter (4 Channel) 

XXXHSFICBOX

 

Housing, Fiber optic/RJ-45 converter and power supply

SVCOSSAPKG

 

On-site Start-up and Commissioning Service (North America Only)

ES150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes

RAYTES150-LT

 

 ES150 System with MP150LT 20 to 350°C   (68 to 572°F),  3 to 5 microns   

RAYTES150-MT

 

 ES150 System with MP150MT, 100 to 800°C (212 to 1472°F),  3.9 microns  

RAYTES150-G5

 

 ES150 System with MP150G5, 100 to 950°C (212 to 1742°F),  5 microns 

RAYTES150-P30

 

 ES150 System with MP150P30,  30 to 250°C   (86 to 482°F),  3.43 microns   

RAYTES150-P31

 

 ES150 System with MP150P31, 100 to 350°C (212 to 662°F),  3.43 microns   

RAYTES150-1M

 

 ES150 System with MP1501M, 600 to 1200°C (1112 to 2192°F), 1 micron 

RAYTES150-2M

 

 ES150 System with MP1502M, 400 to 950°C (752 to 1742°F),    1.6 micron  

OPTIONS

 

 

XXXTMP150CERT

 

Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)

XXXTMP50ACRMB

 

Adjustable Rugged Mounting Base (includes scanner mounting plate)  

XXXHSFIC1

 

High Speed Fiber-Optic/RJ45 Converter (1 Channel)

XXXHSFIC2

 

High Speed Fiber-Optic/RJ45 Converter (4 Channel) 

XXXHSFICBOX

 

Housing, Fiber optic/RJ-45 converter and power supply

SVCOSSAPKG

 

On-site Start-up and Commissioning Service (North America Only)

EC150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes

RAYTEC150-P30-R

 

 EC150 System with MP150P30,  30 to 250°C   (86 to 482°F),  3.43 microns   

RAYTEC150-P31-R

 

 EC150 System with MP150P31, 100 to 350°C (212 to 662°F),  3.43 microns   

OPTIONS

 

 

XXXTMP150CERT

 

Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)

XXXTMP50ACRMB

 

Adjustable Rugged Mounting Base (includes scanner mounting plate)  

XXXHSFIC1

 

High Speed Fiber-Optic/RJ45 Converter (1 Channel)

XXXHSFIC2

 

High Speed Fiber-Optic/RJ45 Converter (4 Channel) 

XXXHSFICBOX

 

Housing, Fiber optic/RJ-45 converter and power supply

SVCOSSAPKG

 

On-site Start-up and Commissioning Service (North America Only)

CS210 Infrared Linescanning System for Rotary Kilns

RAYTCS211R1

 

CS211 Rotating Kiln System (Single Scanner)
Linescanner MP150HR
Protective Housing XXXSYSPHSS, stainless steel
Position Indicator with junction box (XXXSYSSECPI)
System Connection Box (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room
DataTemp CS Software
Documentation

RAYTCS212R1

 

CS212 Rotating Kiln System (Dual Scanner)
2 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
2 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation

RAYTCS213R1

 

CS213 Rotating Kiln System (Triple Scanner)
3 Linescanners MP150HR
3 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
3 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation

RAYTCS214R1

 

CS214 Rotating Kiln System (Quad Scanner)
4 Linescanners MP150HR
4 Protective Housings XXXSYSPHSS, stainless steel
Position indicator with junction box (XXXSYSSECPI)
4 System Connection Boxes (field) CS210CONBOX
Fibre Optic Converter Housing XXXHSFICBOX (control room)
DataTemp CS Software
Documentation

RAYCS210EXT

 

CS21x Extension  KIT
Maximum Extension up to a four Scanner System
1 Scanner RAYTMP150HRR1
1 Stainless Steel protective housing incl. Mounting Base XXXSYSPHSS
1 System Connection Box XXXCS210CONBOX
Scanner Cable Set LT
New License file (Serial number from all existing scanners needed with P.O.)

 

 

 

 

 

ACCESSORIES

XXXSYSCS210CON

 

Serial Ethernet Converter

 

 

Please note: Always necessary to connect with following components:XXXTCSLRM210, FAN Control Hardware, XXXTCS200BZ and XXXTCS200SM

XXXCS210CONBOX

 

CS210CONBOX,CS210 SYSTEM CONNECTION BOX

XXXCS210ENCON

 

Endurance Connection Box

XXXSYS16DA*

 

RS485 Remote Controller with 16 Digital-Outputs

XXXSYS7RA

 

7-Channel Relays Output Modul

XXXTCS210BZ

 

Burning Zone Monitoring: Endurance Connection Box
Endurance Ratio Pyrometer, 600 to 1800°C
15 m High Temperature Cable
ThermoJacket Housing for E-TJ1
Blast Gate Assembly with Quartz Window
30 cm sighting tube, stainless steel
Adjustable Pipe Adapter assembly
Adjustable Mounting Base for Thermojacket
Air Flow/Pressure Regulator Assembly

XXXTCS200SM

 

Shadow Monitoring: consists of MI Connection Box, MIH Sensor  -40 to 600°C, 8 m high temperature cable,  Air Purge Jacket, stainless steel, Adjustable Mounting Bracket.

XXXTCSLRM210

 

Live Ring Migration for CS210 System, complete with LRM Remote Controller & 3 position indicators

XXXSYSLDM

 

Laser distance meter

XXXPi20FO1

 

Fiber Optic Cable 150 m 

XXXPi20FO2

 

Fiber Optic Cable 300 m

SVCOSSAPKG

 

On-site Start-up and Commissioning Service (Item # 2509605/North America only)

XXXSYS4AA

 

Analog Output Module (4 channels, mA or V)

XXXSYS485CV

 

RS232/RS485 Converter (required for Output Modules) 

 

 

 

 

 

CS100/200 UPGRADES to CS210 

XXXCS210BUPGRADE

 

Basic Upgrade to CS Software. This is not a full upgrade to the level of CS210
Not all functions of CS210 Upgrade are supported.
No new wiring of system needed.

XXXCS211BUPGRADE

 

CS101 to CS211 (1 scanner system)
Basic System Upgrade without new Scanner. 
This upgrades requires the use of the MP150 line scanner to utilize all funcitonality.
Will work with MP50 (older generation) but not all features will be available
New wiring of system needed.

XXXCS212BUPGRADE

 

CS102  to  CS212 (2 scanner system)
Basic System Upgrade without new Scanner. 
This upgrades requires the use of the MP150 line scanner to utilize all funcitonality.
Will work with MP50 (older generation) but not all features will be available
New wiring of system needed.

RAYCS211FUPGRADE

 

Full System Upgrade (1 scanner system) with new Scanner MP150.
New wiring of system needed.
Accessories analogous to a new CS211 system.

RAYCS212FUPGRADE

 

Full System Upgrade (2 scanner system) with new Scanner MP150.
New wiring of system needed.
Accessories analogous to a new CS212 system.

CS210 Infrared Linescanning System for Rotary Kilns Upgrades & Accessories

XXXTCS3D210

 

3D View Software Upgrade for existing CS210 systems

XXXTCSRFM210

 

Refractory Management Software (incl. 3D Software) Upgrade for existing CS210 Systems

XXXCS210CONBOX

 

CS210 System Connection Box

XXXCS210ENCON

 

Endurance Connection Box

E1RL-F2-L-0-0

 

Endurance Ratio Pyrometer, 600 to 1800°C 

A-CB-HT-M16-W12-15

 

15 m High Temperature Cable, 200°C 

A-TJ-EN

 

ThermoJacket Housing for Endurance 

XXXTXXGTQ

 

Blast Gate Assembly with Quartz Window (HT models)

XXXTST12

 

30 cm sighting tube, stainless steel 

XXXTXXAPA

 

Adjustable Pipe Adapter assembly 

XXXTXXMB

 

Adjustable Mounting Base for Thermojacket 

XXXTXXAR

 

Air Flow/Pressure Regulator Assembly 

XXXSYSCS200MICON

 

MI Connection Box (necessary for MIH Sensor)

RAYMI310LTHCB8

 

MI3 Sensor, -40 to 600°C, 8 to 14 µm, D:S 10:1, 130 ms, 8 m cable  

D82MIACAJ

 

Air Purge Jacket, stainless steel 

XXXMIACAB

 

Adjustable Mounting Bracket 

RAYTMP150HRR1

 

Kiln Scanner RAYTMP150HRR1 

XXXSYSPS1

 

Industrial Power Supply Extra 240VAC/24VDC/2,5A 

XXXSYSPHSS

 

Stainless Steel Protective Housing 

XXXSYSECPI

 

Position Indicator 

XXXSYSPHSW

 

Protective Window For SYSPHSS 

XXXHSFIC4

 

High Speed Fiber-Optic/RJ45 Converter (4 canals)

XXXSYSCONNBOXHEAT

 

Heater System

XXXTMP150FSNPT

 

NPT Fitting Set

XXXTMP150FSISO

 

ISO Fitting Set

XXXTCSLRMMCONNBOX

 

LRM Remote Control box

MP150 SYSTEM ACCESSORIES - ES150, EC150, TF150 and GS150

RAYSYSSOFTWARE

 

MP150 systemsoftware DTDP 

XXXSYSPS

 

Ind. Power Supply Standard 100VAC to 240VAC/24VDC/1.3A for DIN rail mounting

XXXSYSPS1

 

Industrial Power Supply 100VAC to 240VAC/24VDC/2.5A for DIN rail mounting

XXXETHBASICKIT

 

Basic Kit for Output Adding

XXXETH16DI

 

16-Channel Digital Input

XXXETH16DO

 

16-Channel Digital Output

XXXETH2AISO

 

Passive Current Isolator

XXXETH2AOC0

 

Analog Output Module 0-20 mA (2 each)

XXXETH2AOC4

 

Analog Output Module 4-20 mA (2 each)

XXETH2AOV

 

Analog Voltage Output Module 

XXXETH2R

 

Output Relay (2 each)

 

CARBON ANODE BAKE FURNACE SOLUTION

CABFR1ACF1

 

4 Type of Cable (3, 4, 6, 10 meter)

CABFR1BCF1

 

4 Type of Cable (3, 4, 6, 10 meter)

 INSTALLATION ACCESSORIES FOR CARBON ANODE BAKE FURNACE 

 

 

 CABINSTALL1 

 

Carbon Anode Bake Furnace Installation Kit.  Stainless Steel hardware with quick disconnect, air purge, sight tube and 3m (10ft.) protection tube. For use with 3m fiber-optic cable.  

 CABINSTALL2 

 

Carbon Anode Bake Furnace Installation Kit.  Stainless Steel hardware with quick disconnect, air purge, sight tube and 4m (13ft.) protection tube. For use with 4m fiber-optic cable.   

 CABINSTALL4 

 

Carbon Anode Bake Furnace Installation Kit.  Stainless Steel hardware with quick disconnect, air purge, sight tube and 10m (30ft.) protection tube. For use with 3m fiber-optic cable.   

 XXXFRFAWCKIT 

 

 Field installable, Electronics cooling platform   

 SMART RS485 CONVERTERS:  These RS-485 to RS-232 interface converters are recommended for use with all Raytek Software Packages 

XXXUSB485

 

USB to RS232/422/485 converter 

 SPARE PARTS 

 

 

 XXXFR1HCF1B 

 

 Replacement/Spare fiber-optic head 

XXXFR1CB3

   

3m (10ft.) FR1 fiber-optic cable 

 XXXFR1CB4 

 

 Replacement/Spare 4m (13ft.) fiber-optic cable 

XXXFR1CB6

   

6m (20ft.) FR1 fiber-optic cable 

 XXXFR1CB10 

 

10m (33ft.) FR1 fiber-optic cable 

BF1FRWINDOW

 

Sapphire protective Window mounted in Stainless Steel bezel  

RAYTX-S (Smart Series) 

RAYTX-S-LT

 

Low Temp: -18 to 500°C (0 to 932°F) / 8 to 14 microns, TXSLT default scaling is -18 to 500°C (0 to 932°F) and can be field set up to 0 to 1000°F), TXFLT output fixed and scaled to 0 to 1000°F, TXCLT output is fixed and scaled to -18 to 500°C

RAYTX-S-LT0

 

Low Temp: 0 to 500°C / 8 to 14 microns, TXCLT output is fixed and scaled 0 to 500°C (For use with TXC units only)

RAYTX-S-MT

 

Medium Temp: 200 to 1000°C (392 to 1832°F) / 3.9 microns, TXSMT default scaling is 200 to 1000°C (392 to 1832°F), TXFMT output fixed and scaled to 400 to 1800°F, TXCMT output is fixed and scaled to 200 to 1000°C

RAYTX-S-HT

 

High Temp: 500 to 2000°C (932 to 3632°F) / 2.2 microns, TXSHT default scaling is 500 to 2000°C (932 to 3632°F), TXFHT output fixed and scaled to 950 to 3600°F, TXCHT output is fixed and scaled to 500 to 2000°C

RAYTX-S-G5

 

Glass Surface: 250 to 1650°C (482 to 3002°F) / 5.0 microns, TXSG5 default scaling is 250 to 1650°C (482 to 3002°F), TXFG5 output fixed and scaled to 500 to 3000°F, TXCG5 output is fixed and scaled to 250 to 1650°C

RAYTX-S-P7

 

Thin Film Plastics (Polyester & Teflon): 10 to 360°C (50 to 680°F) / 7.9 microns, TXSP7 default scaling is 10 to 360°C (50 to 680°F), TXFP7 output fixed and scaled to 50 to 650°F, TXCP7 output is fixed and scaled to 10 to 360°C

FOCUS OPTION FOR RAYTX-S

SF

 

Standard Focus, (33:1 D:S for all models except HT which has 60:1)

CF1

 

Close Focus 1, (Not available for P7, consult factory for special G5 close focus)

CF2

 

Close Focus 2, (Not available for P7, consult factory for special G5 close focus)

PSF

 

Plastic Fresnel Lens, Standard Focus, 15:1 D:S for LT models only

 

 

OPTION FOR RAYTX-S

IS4

 

Intrinsically-Safe Rating, for TXS models only
EX II 2G Ex ib IIC T4 Gb (gases/vapors)
EX II 2D Ex ibD IIIC T135°C Db (dusts)

IS4W

 

Intrinsically-Safe Rating for TXS including Water/Air Cooled Housing/Air Purge Collar
EX II 2G Ex ib IIC T4 Gb (gases/vapors)
EX II 2D Ex ibD IIIC T135°C Db (dusts)

IS5

 

Intrinsically-Safe Rating, for TXS models only, PTB-approval
EX II 2G Ex ib IIC T4 Gb (gases/vapors)
EX II 2D Ex ibD IIIC T135°C Db (dusts)

IS5W

 

Intrinsically-Safe Rating for TXS including Water/Air Cooled housing/Air Purge Collar, Stainless Steel
EX II 2G Ex ib IIC T4 Gb (gases/vapors)
EX II 2D Ex ibD IIIC T135°C Db (dusts)

XXXTXCERT

 

Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item)

XXXTXACTWL

 

Amtir Protective Window for LT model 

XXXTXACTWM

 

Sapphire Protective Window for MT model

XXXTXACTWH

 

Glass Protective Window for HT model 

XXXTXACTWGP

 

Calcium Fluoride Protective Window for G5 and P7 models 

XXXTXACTWLF1

 

Plastic Foil Protective Window in stainless Steel frame - for use with Laser-sighted models  (includes 10 spare foils) 

XXXTWLF

 

10 spare plastic foils for XXXTXACTWLF1 

XXXTXACTWLS

 

Stainless Steel Amtir Protective Window for LT model 

NOTE:  Protective windows are shipped uninstalled from the factory. To signify "factory installed" window please add "I" to the end of the part number (e.g. XXXTXACTWL becomes XXXTXACTWLI) 

XXXTXACRCK

 

Remote Communications Kit for Smart Model TXS, includes HART/RS232 adapter, cables & DataTemp Multidrop software. 

XXXSYSPS

 

24VDC power supply (100/240),1.3 amps

RAYGPC

 

Remote Panel Mount  Display and Power Supply for XR Sensors  

RAYGPCM

 

GPC panel-mount meter with 3 A mechanical alarm relay outputs, fully isolated electrical inputs and outputs, 110/220 VAC power  

BFATXISSET

 

Required Complete ABB power supply, IS barrier and isolater set for Intrinsically safe TX sensors

XXXTXXACAP

 

Air purge collar  

XXXTXXACCA

 

Conduit adapter 

XXXTXXACPA

 

Pipe adapter (Sighting Tubes listed below can be attached to this) 

XXXTXXACMN

 

Mounting nut  (spare) 

XXXTXXACFB

 

Fixed bracket  (spare) 

XXXTXXACAB

 

Adjustable bracket  (spare)

XXXTXXACSB

 

Swivel bracket 

XXXTXXACSV

 

Sighting viewer setup tool  

XXXTXXACRA

 

Right angle mirror (for targets at right angles to sensor axis) 

XXXTXXACAFA

 

Adjustable Furnace Wall Mounting Assembly  

XXXTXXACFA

 

Wall Mount Flange Assembly  

XXXTXXACAPS

 

Stainless Steel Air Purge Collar  

 

 

 

 

Liên hệ & Báo giá chi tiết:

Sale ANS Vietnam:

support@ansgroup.asia

  Trực tiếp FaceBook

 Trực tiếp Zalo: 0911472255 

  Snapchat QR