Transducer is available in 3 versions:

  • basic,
  • with SD/SDHC card,
  • with Ethernet and internal file system memory.

Features and functions:

  • Programmable input
    • DC parameters
    • current via shunts +/- 150mV
    • voltage 0...12/48/100/250V or 0...600/1000V with additional resistor
  • Output:
    • 1 x analog 0/4...20mA or 0...10V
    • 1 x relay, optionally changeable to CANopen output or to 0/4...20mA or 0...10V analog output
    • 1 x additional relay, optionally changeable to 0...24V d.c. supply output
  • LCD 2 x 8 characters with LED backlight
  • Supply: 85..253 V a.c./d.c. or 20...40 V a.c./d.c., / 20...60 V d.c.
  • Conversion of measured values into an output signal on the base of the individual linear characteristic
  • 1 or 2 alarm relays with NO contact operating in 6 modes
  • Additional supplying output 24 V d.c 30 mA switched-on/switched-off (option).
  • Recording of input signals in internal file, on SD/SDHC card (option) or internal file system memory (option).
  • Interface RS-485 Modbus RTU.
  • RS-485 Master/Monitor mode – possibility to poll 1 device
  • Protocol CANopen (option)
  • SD/SDHC support (option).
  • Interface Ethernet 10/100 BASE-T (option).
    • Protocol: Modbus TCP/IP, HTTP, FTP.
    • Services: www server, ft p server, client DHCP
  • Dimension: 45 x 120 x 100mm.