GPR-2500 A % OXYGEN ANALYZER

 

Features an advanced galvanic oxygen sensor capable of measuring oxygen concentrations ranging from 0.05% to 100% over a 60 month operating life with no periodic maintenance required, menu driven controls, and, two (2) field selectable alarm set points.

 

Accuracy:  < 2% of FS range under constant conditions  Analysis:  0-1%, 0-5%, 0-10%, 0-25% FS ranges;
auto or fixed ranging
 Application:  Oxygen analysis in inert, hydrocarbon, helium, hydrogen,
mixed and acid (CO2) gas streams
 Area Classification:   General purpose
 Alarms:  Two user configurable alarms: magnetic coil relays rated 3A
at 100 VAC, field programmable alarm time delays, alarm
bypass for calibration and system fail alarm
 Calibration:  Air or certified span gas of O2balance N2approximating 80%
of range above analysis range recommended
 Compensation:  Barometric pressure and temperature  Connections:  1/8″ compression tube fittings
 Controls:  Water resistant keypad; menu driven range selection, calibration and system functions  Display:  Graphical LCD 2.75” x 1.375”; resolution 0.01 PPM; displays
real time ambient temperature and pressure
 Enclosure:  Fiberglass NEMA 4X, 14”x10”x5″, 8 lbs.  Flow Sensitivity:  None between 0.5-5 SCFH, 1-2 SCFH recommended
 Linearity:  ±1% of full scale  Pressure:  Inlet – regulate to 5-30 psig to deliver 1-2 SCFH flow to
transmitter; vent – atmospheric
 Power:  12-24 VDC non-loop power  Response Time:  90% of final reading in 10 seconds
 Sample System:  None  Sensitivity:  < 0.5% of FS range
 Sensor Model:  GPR-11-32-4 for inert gases;
XLT-11-24-4 for gases containing > 0.5% CO2
 Sensor Life:  36 months (GPR), 24 months (XLT) at 25ºC and 1 atm.
 Signal Output:  4-20mA  Operating Range:  Recommended -10 ºC to 45ºC (GPR sensor),
-20ºto 45ºC (XLT sensor)
 Warranty:  12 months analyzer; 12 months sensor  Wetted Parts:  Stainless steel