• DIN Rail Mounting
  • Ideal for applications with minimum system tare such as platforms or pressure transducers
  • 20 to 28 Vdc power
  • Input selectable between 10, 20 and 30 mV
  • Adjusting Zero and Full Scale through Dip-switch and trimmer

 


 
 

TECHNICAL CHARACTERISTICS AT08

Input range: 24 Vac/Vdc ±15%
Trasducer input voltage: 10 Vac/120 mA (max 4 beam load by 350 Ohm)
Max power: 5 W
Analog output: 0÷10 Vdc bipolar, 0÷20 mA or 4÷20 mA
Maximum input signal: between 10 mV, 20 mV and 30 mV
Linearity: ±0.02% FS
Temperature range: -10 ÷ +50°C
Storage temperature: -20 ÷ +70°C
Temperature drift: 0.005% FS/°C
Calibration: 20 spin by trimmer (-8% ÷ +3% F.S.)
Full scale calibration (FS): 20 spin by trimmer (±5% FS)
Analogic filter: Adjustable by single turn trimmer 270 °C
Rensponse time: 5÷250 ms. (fixed to 5 ms on output mA)
Mounting: DIN guide
Dimensions: 78 x 92 x 52 mm
Connection: Terminal screw pass 5.08 mm
Number of connected beam load: max of 4 beam load
Certifications: EN50082-2, EN55011, EN61000
Options: Exitation 115 or 230 Vac 50/60 Hz (for DIN guide) Excitation 12 Vdc ± 15% (bipolar output 0÷5 Vcc) analogic filter with response time 0,5÷25 ms