• Monitoring of hot gases in individual setup for facilities not under directives 2000/76/EC and 2001/80/EC
  • Continuous measurement of particulate matter concentration via scattered light principle
  • Automatic zero and span drift check and adjustment
  • Easy adjustment with checking rods
  • Highest sensitivity in range µm/Nm³
  • Low contamination of the flow cell

The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod.

Nominal range

0 .. 100 PLA (Polystyrol-Latex-Aerosols)

Scale ranges

max. 8 ranges between 0..0.05 PLA and 0..100 PLA

Resolution

0.0002 PLA

Protection

IP65

Sample flow rate

25..50 l/min

Power input

25 W (basic version)

Weight

ca. 8.4 kg (basic verson)

Sample temperature

max. +170°C

Sample pressure

max. ±3'000 Pa (±30 mbar)

Interfaces

Profibus DP (optional)

Connections

2 x 0/4 .. 20 mA, max. 600 ohms
2 x relais contacts max. 250 VAC, max. 4 A
digital in-/outputs max. 5 V

Ambient environment

-20 .. +50° C
0 .. 99% rel. humidity, not condensing

Maximum service altitude

3,000 m above sea level

Power supply

85..264 V / 47..63 Hz
or 24 VDC

Lowest measuring range 0-0.05 PLA
Highest measuring range 0-100 PLA
Applications in Chemical / Pharmaceutical Industry
Emission Monitoring
Machine and Metal Industry
Power Plants
Pulp / Paper Industry
Waste Water Treatment

 

Industry Measuring Point

Chemical / Pharmaceutical Industry

Continuous Stack Emission Monitoring (CSEM)

Emission Monitoring

Continuous Stack Emission Monitoring (CSEM)

Machine and Metal Industry

Continuous Stack Emission Monitoring (CSEM)

Power Plants

Continuous Stack Emission Monitoring (CSEM)

Pulp / Paper Industry

Continuous Stack Emission Monitoring (CSEM)

Waste Water Treatment

Continuous Stack Emission Monitoring (CSEM)