• Ozone monitoring in ultra pure water
  • Measuring principle according to DIN 19627 and IOA at 254 nm
  • Display in mg/l
  • Dual-beam measurement for high stability
  • Fast and simple verification with control unit

The Ozone meter for gases measures the ozone concentration according to standard DIN 19627 and the IOA (International Ozone Association) at a wavelength of 254nm. According to these standards, the extinction coefficient is 3024 l/mol cm. Therefore, the ozone measurement can be regarded as an absolute measurement requiring no calibration with ozone. The special measuring cell with a path-length of 100mm allows measuring ozone in ultra pure water in the ppb range. For inspecting the instrument, checking units on the basis of reference filters can easily be inserted. Operation is done intuitive using the intelligent control system SICON via touch screen technology and colour display. Values, graphs, alarm and status messages can be presented. An internal data logger allows recalling and displaying measured data from the last 32 days. A variety of analogue and digital interfaces allows smooth system integration and control.

Measuring principle

Absorption

Nominal range

0 .. 200 mg/l

Resolution

1 µg/l

Measuring wave length

254 nm

Enclosure

ANSI 304

Protection

IP65

Flow cell material

ANSI 316L

Power input

21 W

Weight

4.3 kg

Sample temperature

max. 80°C

Sample pressure

max. 600 kPa (= 6 bar)

Ambient environment

-20 .. + 50°C

Maximum service altitude

3,000 m above sea level

Power supply

85 .. 264 V / 47 .. 440 Hz
24 VDC

Wavelengths UV

254 nm

Units

mg/l

Linearity

superior to ±0.5% transmission

Lowest measuring range 0-0.1 mg/l
Highest measuring range 0-200 mg/l
Applications in Chemical / Pharmaceutical Industry

 

Industry Measuring Point

Chemical / Pharmaceutical Industry