F-1000 SERIES TURBINE FLOW METERS – Đo lưu lượng dạng cánh quạt Onicon

Đồng hồ đo lưu lượng tuabin ONICON F-1000 được thiết kế phù hợp với kích thước đường ống có đường kính từ ¾ "đến 72" (1 "đối với đồng).

Ứng dụng của đồng hồ đo lưu lượng tuabin F-1000 Series bao gồm đo lưu lượng :

  • Nước lạnh
  • Nước nóng
  • Nước ngưng tụ
  • Nước sinh hoạt
  • Quy trình làm mát
  • Hơi nước ngưng tụ và nước muối.

Đặc tính nổi bật :

  • Độ chính xác cao - Highly Accurate

NIST traceable factory calibration performed on every meter, within ±0.5% of reading accuracy at the calibrated (typical) flow velocity and within ±1-2% of reading over a 50:1 flow range. ONICON's price vs. performance is unmatched.

  • Thang đo hoạt động rộng -  Unequaled Operating Range

Provides repeatable flow data over a 175:1 turndown from 0.17 to 30 ft/s.

  • Độ bền cao - Excellent Long-Term Reliability

Patented non-magnetic impedance sensing method, low mass non-metallic turbines with sapphire jewel bearings and tungsten carbide shafts provide a mechanical system that virtually does not wear.

  • Thiết kế đơn giản – dễ lắp đặt và tháo lắp - Simplified Hot Tap Insertion Design

Integral hot tap design is standard for all insertion meters and allows installation and removal without system shutdown. Turbine flow meters can be removed and reinserted by hand without special tools.

  • Tích hợp ngõ ra conditioned - Integral Conditioned Outputs

Electronics enclosure includes integral conditioned output circuitry for ease of installation. Analog output models include both 4-20 mA and 0-10 VDC signals. Isolated analog, dry contact switch and frequency outputs are also available.

Thông tin chi tiết: Xem tại đây!

noXem thêm các sản phẩm của ONICON VIETNAM tại đây!