U Line Contender Factory Sealed 20 Amp Plugs Receptacles

Explosionproof and Dust-Ignitionproof. Factory Sealed.

• NEC:
  • Class I, Groups C, D
  • Class I, Division 2, Group B
  • Class I, Zone 1, Group IIB
  • Class I, Zone 2, Group IIB + H2
  • Class II, Groups F, G
  • Class III
  • NEMA 3RX (NEMA 4X when the screw cover kit is installed and the cover is fully engaged)

U-Line® Contender® plugs and receptacles offer all the advantages of U-Line technology without the need to replace competitor’s back boxes that have already been installed. Simply change out the receptacle and your company can benefit from the safety, flexibility and value of U-Line. Appleton provides its own compatible back boxes, so you can continue to expand your facility using a single vendor.

U-Line Contender plugs and receptacles allow the use of electrical equipment in hazardous locations. In non-hazardous locations, the U-Line ECP plug fits into standard NEMA 5-20R and 6-20R receptacles. In hazardous locations, the same U-Line plug is the key to energizing the explosionproof U-Line receptacle. A twist of the plug makes electrical contact and locks the plug in place with an audible click. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds.

Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can’t be energized by an ordinary plug—ensuring that only safe connections can be made in a hazardous location.

U-Line® Contender® Factory Sealed 20 Amp Plugs and Receptacles Catalog Pages

Applications:

• Lighting systems, heaters, motor generator sets, air conditioners, compressors, pumps and other portable and stationary equipment
• Damp or corrosive environments
• Equipment that is used in both ordinary and hazardous locations

Features:

• Covers are UL Listed when used with Contender Series EDS back boxes
• The U-Line Interchanger™ ECP plug is suitable for use in refineries, petrochemical plants and other areas where ignitable gases are present
• The NCP plug is ideal where moisture or corrosion is a constant problem, such as marine platforms and pipeline transportation facilities
  • ECP plug fits any standard non-explosionproof receptacle (NEMA 5-20R, or 6-20R) as well as U-Line explosionproof receptacle
• Intermateable with competitor’s plugs of like configuration
• Insulators provide superior dielectric and mechanical strength and lowest arc tracking
• Dead front design: receptacle is not energized until plug is fully inserted and switch is engaged
• GFS-1 factory sealed ground fault circuit interrupter provides UL and CSA Certified ground fault protection for portable equipment operated in hazardous locations.

Catalog Numbers: