DAT 100/ANALOG weight transmitters Pavone Sistemi
Giá bán: Liên hệ
Hãng sản xuất: Pavonesistemi
Danh mục: Thiết bị trong dây chuyền sản xuất
Bảo hành: 0
Gọi lại cho tôi
0898 788 268
- High performance and long-term reliability
- Assembly "snap-on" DIN rail (EN50022)
- ANALOG output
- Configuration and calibration from the front panel executable with certificates of transducers, or with dead weights
- 2 logic inputs and 2 relay outputs
- Serial RS232 output, ASCII protocols and Modbus RTU
- The dimensions of width contained allow to place a large number of transmitters within the electrical panels automation
- Interfacing with intrinsically safe barriers for use in hazardous areas
TECHNICAL CHARACTERISTICS DAT 100/ANALOG
| Trasducer input voltage: | 4 V (max 4 cells 350 Ohm) |
| Measuring range: | –4 ÷ +4 mV/V |
| Rated load (R.L.): | 0.02 V/division |
| Linearity: | < 0.01% FS |
| Gain drift: | < 0.001% FS/°C |
| Display: | 5 digit, red LED (7 segments), h 7 mm |
| LED status: | 2 red |
| D/A convertitor: | 24 bit |
| Internal resolution: | 16.000.000 counts |
| Visible resolution: | 60.000 division visible on net weight |
| Divisions value (adjustable): | 0.001÷50 |
| Filter: | 0.2÷25 Hz adjustable |
| Keyboard: | 3 mechanic buttons (under the red window) |
| Tool voltage: | 24 V c.c. ±10% – power 2 W |
| Temperature range: | -10 ÷ +50°C |
| Storage Temperature: | -20 ÷ +60°C |
| Logic output: | 2 Solid-state relays, (maximum load 24 Vdc / 100 mA each) |
| Logic input: | 2 optoisolated 24 V c.c. PNP (External voltage) |
| Serial door: | RS232C half duplex with ASCII or Modbus RTU protocol, RS485 full duplex with ASCII or Modbus RTU protocol |
| Baud rate: | 2400 ÷ 115200 adjustable |
| Trasmission distance: | 15 m |
| Analogic output: | 16 Bit optoisolated |
| Tension: | 0÷5/10V (R min10 K Ohm) |
| Current: | 0/4÷20mA (R max 300 Ohm) |
| Linearity: | < 0.03% FS |
| Gain drift: | < 0.002% FS |
| Regulatory compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for electrical security |
| Electrical connection: | Terminal screw pass 5.08 mm |
Accessories are not to be considered included in the price of each product.
All the above is purely illustrative and not to be understood demanding towards Pavone Sistemi
All the above is purely illustrative and not to be understood demanding towards Pavone Sistemi
