Bộ hiển thị Microprocessor-based digital indicators M748 BCS Italy Vietnam - BCS Italy Vietnam

Microprocessor-based digital indicators/ Bộ hiển thị  M748_BCS Italy srl Vietnam BCS Italy Vietnam, Đại lý BCS Italy Vietnam
Microprocessor-based digital indicators/ Bộ hiển thị M871 _BCS Italia srl Vietnam BCS Italy Vietnam, Đại lý BCS Italy Vietnam

Digital indicator type M748 has been specifically designed to operate in  connection to load cells or other strain-gauges transducers.

The instrument is compact, rugged, reliable, with a very good noise immunity, manufactured with first-class components and carefully assembled and tested.

The analog-to-digital conversion of the input signal is effected by a sigma-delta A/D converter, with a 16-bit internal resolution; the instrument is a ratio meter, using the transducer supply voltage as reference voltage, so compensating any error due to voltage drops along the connecting cable.

The instrument can be provided with two analog inputs, for the acquisition of the signals of two load cells or load cell groups.

The digital functions of the instrument are carried out by a CHMOS single-chip microprocessor; several options are available (see relevant list).

Instrument setup and calibration, commands and parameter settings are carried out through a polycarbonate keyboard, with 16 numeric and function keys.

The built-in stabilized and short-circuit protected power supply unit, 5 V DC 60  mA max, is suitable to energize up to six strain-gauges bridges, 350 ohms, parallel connected.

The indicator consists of a motherboard with a display board; it can be assembled in several types of metal or plastic boxes.

Display: 5 digits, LED 7 segments, 14 mms high, red; adjustable brightness

Range: internal 16 bit, engineering unit to be stated; resolution 1, 2, 5, 10; programmable decimal point

Zero and calibration: through keyboard

Accuracy: ± (0.01% of reading + 1 unit of LSD)

Sensitivity: 1 µV/LSD

Reading rate: up to 100 readings/second

Input impedance: greater than 100 Mohms

Common mode rejection: 100db

Room temperature: operating 0 ÷ 55 °C; storage -10 ÷ 70 °C

Relative humidity: max. 80%

Temperature coefficient: 4 ppm/°C on zero; 4 ppm/°C on span

Line voltage: 115 or 230 V ± 10% - 50/60 cycle, or 12 or 24 V DC

Consumption: 5 VA max

Connections: removable binding post connectors


-TA/D  Zeroing  of net weight, through keyboard or remote command  (free contact), with selection of indication of gross or net weight

-S1-S2-S3-S4  One, two, three or four alarms for minimum or maximum load, with settable alarm value and time delay; each alarm is provided with  an SPDT relay, 2 A capacity @ 110/220 V AC

-RS232  RS232C serial output, without control signals, programmable parameters

-RS485  RS485 serial output, programmable parameters

-DP  Profibus DP or Profinet or Ethernet or DeviceNet output  

-UA/V-UA/mA  analog output, 0÷10 V or 0÷20 or 4÷20 mA, with programmable parameters

-IA2  Dual analog input

Xem thêm thông tin sản phẩm tại đây